ASTM A213 T22 extruded finned tube?

What is ASTM A213 T22 extruded finned tube?

ASTM A213 T22 extruded finned tube is a heat exchanger tube with extruded aluminum fins on the outside surface, made from T22 grade steel, which is an alloy steel per ASTM A213 standard. The fins are extruded from the base tube, which increases the surface area and enhances heat transfer efficiency. These finned tubes are typically used in high-temperature and high-pressure applications, such as boilers, superheaters, and heat exchangers in power plants or industrial settings. The T22 grade steel has good high-temperature strength and resistance to corrosion and oxidation.

Why use ASTM A213 T22 extruded finned tube?

ASTM A213 T22 extruded finned tubes are used in applications where high-temperature and high-pressure resistance is required, such as in boilers and heat exchangers. The use of an extruded finned tube made of this material can improve the heat transfer rate by increasing the surface area of the tube, which enhances the efficiency of heat transfer. The material itself, ASTM A213 T22, is a seamless ferritic and austenitic alloy-steel that is designed to withstand high temperatures and pressures, making it ideal for use in such applications. Additionally, the extruded fins provide better heat transfer performance compared to other types of fins, such as welded or spiral fins, due to the strong bond between the fins and the tube wall, resulting in increased heat transfer efficiency.

ASTM A213 T22 extruded finned tube regular size?

The size of ASTM A213 T22 extruded finned tubes can vary depending on the specific application and the manufacturer. However, there are some common sizes available in the market. The outer diameter of the tube can range from 3/4 inch to 3 inches, and the fin height can range from 3/16 inch to 1 inch. The length of the tube can be customized according to the requirements of the application. It is always recommended to consult with the manufacturer or supplier for specific size and length requirements to ensure the tube is suitable for the intended application.

ASTM A213 T22 extruded finned tube

Comments

What is tube sheet layout?

What is tube sheet layout? A tube sheet is a component used in shell and tube heat exchangers and other types of heat transfer equipment. It is a flat plate with holes drilled in it, through which tubes are inserted and secured. The tube sheet serves as a barrier between the two fluids, allowing heat to be transferred from one to the other. The layout of the tube sheet depends on the design of the heat exchanger, which includes the number of tubes, the size of the tubes, and the spacing between the tubes. The layout is typically determined using computer-aided design (CAD) software, which can optimize the placement of the tubes to achieve the desired heat transfer performance. In general, the tubes are arranged in a triangular or square pattern on the tube sheet. The triangular pattern is often preferred because it provides better support for the tubes and reduces the risk of vibration and damage. The spacing between the tubes is also important, as it affects the flow rate and pressure

What is aluminum finned tubes?

What is aluminum finned tubes? Aluminum finned tubes are a type of finned tube air heat exchanger that uses aluminum fins attached to a tube made of a different material, such as copper or steel. The aluminum fins are typically extruded or formed to increase the surface area of the tube, which in turn increases the efficiency of heat transfer. Aluminum finned tubes are commonly used in HVAC systems, as well as in industrial and power plant applications. They are preferred over other types of finned tubes in some applications because they are lightweight, corrosion-resistant, and have good thermal conductivity. Additionally, aluminum is relatively inexpensive compared to other metals commonly used in heat exchangers, such as copper and stainless steel. The specific properties of aluminum finned tubes can vary depending on the alloy used to make the fins. For example, aluminum fins made from alloys such as 6061 and 3003 have good corrosion resistance and thermal conductivity, while those

What is the difference between pipe bends and elbows?

Bends and elbows are fittings used to change the direction of a pipe. These two kinds of pipe fittings have a wide range of applications in construction, but in actual use, the performance of pipe bends and elbows is different, and elbows are used much more than pipe bends. What is the difference between pipe bends and elbows? An elbow is a pipe part with a bend, which is a commonly used pipe part. Bends are usually manufactured to specific needs. Compared with the elbow, the elbow is much longer and is a curved pipe, while the elbow is only a part that changes the direction of the pipe. Although both are components that change the direction of the pipeline, there are many differences between these two components. 1. Different manufacturing processes for pipe bends and elbows In the manufacturing process cold and hot bent pipes can be made of pipe bends, which directly bent by the pipe bending machine, and the bent pipe can be manufactured at one time without secondary anti-corrosio

Lord Fin Tube--T.S. Industrial Co.,Ltd

Search This Blog