U-shaped Monel 400 Tube|B163 UNS N04400 Tube

The structure of monel 400 (UNS N04400, NCu30) alloy is a high-strength single-phase solid solution, which is a nickel based corrosion resistant alloy used in industry very early. Monel 400 (with good comprehensive performance and wide application range, it has become an indispensable alloy due to its good corrosion resistance. Monel 400 is mainly composed of Ni, 30% Cu and a small amount of Fe (1% - 2%).

U-shaped Monel 400 tubes are commonly used in various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, Gasoline and water tanks, etc.

U-shaped Monel 400 Tube|B163 UNS N04400 Tube Chemical Composition

%	C	Si	Mn	Ni	Cu	Fe
Min				63	28
Max	0.3	0.5	2		34	2.5

U-shaped Monel 400 Tube|B163 UNS N04400 Tube corresponding grade

Monel400				Ni68Cu28Fe
JIS	ASTM	UNS、SAE	DIN	EN
NW4400	N0.4400	MONEL400	2.436	NiCu30Fe

Physical properties of U-shaped Monel 400 Tube|B163 UNS N04400 Tube

Specific heat （J/kg.K)	20℃	427
Resistivity(μΩ.cm)		54.7
Thermal conductivity (W/m.K)		21.8
Average thermal expansion coefficient（10-6/℃）	20-100℃	13.9
Melting point（℃）		1300-1500

Mechanical properties of U-shaped Monel 400 Tube|B163 UNS N04400 Tube at room temperature

0.2%Yield Strength（N/mm2)	Tensile Strength (N/mm2)	Elongation（%）	Rockwell Hardness
≤193	≤483	≤35	B75 max

U-shaped Monel 400 Tube|B163 UNS N04400 Tube Usages

U-shaped Monel 400 Tube|B163 UNS N04400 Tube can be used in many industrial fields:

1. Seamless water pipes, steam pipes in power plants

2. Seawater exchangers and evaporators

3. Sulfuric acid and hydrochloric acid environments

4. Crude oil distillation

5. Deep sea Pump shafts and propellers for water use equipment

6. Equipment used in the nuclear industry to manufacture uranium extraction and isotope separation

7. Pumps and valves used in the manufacture of hydrochloric acid equipment

8. Marine structure surface, seawater desalination/salt/right oil refining Equipment, marine components, heat exchangers, chemical/seawater desalination plant valves, pump components, etc.

Comments

What is tube sheet layout?

What is tube sheet layout? A tube sheet is a component used in shell and tube heat exchangers and other types of heat transfer equipment. It is a flat plate with holes drilled in it, through which tubes are inserted and secured. The tube sheet serves as a barrier between the two fluids, allowing heat to be transferred from one to the other. The layout of the tube sheet depends on the design of the heat exchanger, which includes the number of tubes, the size of the tubes, and the spacing between the tubes. The layout is typically determined using computer-aided design (CAD) software, which can optimize the placement of the tubes to achieve the desired heat transfer performance. In general, the tubes are arranged in a triangular or square pattern on the tube sheet. The triangular pattern is often preferred because it provides better support for the tubes and reduces the risk of vibration and damage. The spacing between the tubes is also important, as it affects the flow rate and pressure...

What is aluminum finned tubes?

What is aluminum finned tubes? Aluminum finned tubes are a type of finned tube air heat exchanger that uses aluminum fins attached to a tube made of a different material, such as copper or steel. The aluminum fins are typically extruded or formed to increase the surface area of the tube, which in turn increases the efficiency of heat transfer. Aluminum finned tubes are commonly used in HVAC systems, as well as in industrial and power plant applications. They are preferred over other types of finned tubes in some applications because they are lightweight, corrosion-resistant, and have good thermal conductivity. Additionally, aluminum is relatively inexpensive compared to other metals commonly used in heat exchangers, such as copper and stainless steel. The specific properties of aluminum finned tubes can vary depending on the alloy used to make the fins. For example, aluminum fins made from alloys such as 6061 and 3003 have good corrosion resistance and thermal conductivity, while those...

What is the difference between pipe bends and elbows?

Bends and elbows are fittings used to change the direction of a pipe. These two kinds of pipe fittings have a wide range of applications in construction, but in actual use, the performance of pipe bends and elbows is different, and elbows are used much more than pipe bends. What is the difference between pipe bends and elbows? An elbow is a pipe part with a bend, which is a commonly used pipe part. Bends are usually manufactured to specific needs. Compared with the elbow, the elbow is much longer and is a curved pipe, while the elbow is only a part that changes the direction of the pipe. Although both are components that change the direction of the pipeline, there are many differences between these two components. 1. Different manufacturing processes for pipe bends and elbows In the manufacturing process cold and hot bent pipes can be made of pipe bends, which directly bent by the pipe bending machine, and the bent pipe can be manufactured at one time without secondary...

Lord Fin Tube--T.S. Industrial Co.,Ltd

Search This Blog