Skip to main content

Why we choose stainless steel finned tube

Why we choose stainless steel finned tube

Sophisticated processing technology for stainless steel finned tubes

In the production process, the laser welding stainless steel finned tube is mainly made of 304 stainless steel. It is mainly used for the heat exchange of two media when it is used. The 304 stainless steel finned tube has excellent technology. It is an alternative product for heat exchange and waste heat recovery in boiler, power generation, petrochemical, HVAC, refrigeration, air conditioning and other industries.

Laser welded stainless steel finned tube can effectively improve the efficiency of its heat exchanger during use, to a certain extent, effectively extend its life, reduce volume and save materials, the whole rolled finned tube has no contact thermal resistance, heat transfer Good performance, high strength, heat resistance vibration and mechanical vibration, good thermal expansion performance.

Laser welded stainless steel finned tube has the characteristics of high strength, small flow loss, strong anti-corrosion performance, easy deformation and long working life under long-term cold and hot working conditions. The integrally rolled fins are smooth, free of burrs, wrinkles, and easy to clean. It is easy to remove condensate on the outer surface of the fins during wet cooling in heating and air conditioning projects. It is not easy to form dust and scale in drying and heating and other heat exchange occasions.

The laser-welded stainless steel finned tube has low contact thermal resistance, the product can maintain a stable low value within a large temperature change range, the entire product has a high heat transfer coefficient, and has good resistance to sudden changes in temperature and vibration during use. Units The length of the heat exchange area is large, the heat transfer is high, the structure is reliable, and the life is long; the surface of the fin is smooth without burrs, no wrinkles, and is not easy to scale, easy to clean and exclude surface water, low flow resistance, and can maintain good heat transfer performance for a long time. .

Stainless steel finned tube temperature

In the selection of stainless steel grades, we must pay attention to the surface temperature requirements, and this is also one of the factors that must be considered. So on this question, the answer is yes. Moreover, the surface temperature of different stainless steel grades is different. Moffi Thermal Technology reminds you here, for example, 304 stainless steel, its surface temperature is about 450 ℃, and 321 stainless steel, it is 600 ℃-700 ℃.

Stainless steel finned tube has strong adaptability

The stainless steel finned tube has high heat transfer efficiency when it is used. The disturbance of the fin to the fluid causes the boundary layer to rupture continuously. Because of the relatively large heat transfer coefficient, the stainless steel finned tube is thin because of the separator and the fin. , With high thermal conductivity, so that the finned tube heat exchanger can achieve high efficiency.

Due to the compactness of the laser welded stainless steel finned tube of Murphy Thermal Energy Technology in operation, its equipment has an extended secondary surface when it is used, so that its surface area can reach 1000㎡/m3. The whole product is light and compact, the reason is compact and mostly made of aluminum alloy, and now steel, copper, composite materials, etc. have also been mass produced.

The laser welded stainless steel finned tube has strong adaptability, and it is very suitable for the heat exchange between gas-gas, gas-liquid, liquid-liquid, various fluids, and the phase change heat that occurs in the state change during operation. . Through the arrangement and combination of flow channels, it can adapt to different heat exchange conditions such as counter-current, cross-flow, multi-stream and multi-pass flow.

The manufacturing process of the stainless steel finned tube is strict, the process is complicated, it is easy to be clogged during operation, and it is difficult to clean and repair, so it can only be used for the heat exchange medium is clean, non-corrosive, not easy to scale, not easy to deposit, not easy Occasions.

Stainless steel finned tubes should be regularly checked to a certain extent for deposits, coking, scale deposits and other scale deposits on each finned tube, and immediately cleaned. If there is dust or dirt on the stainless steel aluminum finned tube, you can use a professional cleaning agent, that is, pickling agent, to clean it. Specifically, it is scrubbed with pickling agent, so that you get a good Removal effect. However, it should be noted that there must not be any residues, so as not to cause rust and corrosion of the finned tube. At the same time, it is also necessary to check whether the adhesion of each fin tube and the rubber gasket is tight, and whether the rubber gasket itself is intact, so as to avoid leakage caused by the rubber gasket being degummed and damaged.

Adhesion of rubber gasket of stainless steel finned tube

When re-tightening the finned tube each time the stainless steel finned tube is used, pay attention to the position of the scale when the finned tube is pressed back. During the operation, the rubber gasket must not be overpressed. As a result, the ring life is shortened.

When replacing the rubber gasket of the finned tube of the stainless steel finned tube, all the segments need to be updated during the operation process, so that the unevenness of the spacer gap can be effectively avoided, which will directly affect its The effect of heat transfer.

Under normal circumstances, the stainless steel finned tube should be cleaned with water to start the operation. There should be no slight leakage during the use. When the temperature rises to the sterilization temperature during the use, its product leaks. The situation will disappear by itself, if the leakage is still uninterrupted, the finned tube must be compressed a little more. If it still fails, the rubber gasket must be opened for inspection, and the end of the finned tube is generally arranged in the order of the number on the chip, which should be corrected.


The stainless steel finned tube can be divided into stringed tube (sleeved tube), tension wound finned tube, insert tube, rolled finned tube with no dead angle, cast finned tube, Laser welding composite finned tube, which is divided into high frequency welding finned tube, submerged arc welding finned tube, etc.

Comments

Post a Comment

Popular posts from this blog

What is tube sheet layout?

What is tube sheet layout? A tube sheet is a component used in shell and tube heat exchangers and other types of heat transfer equipment. It is a flat plate with holes drilled in it, through which tubes are inserted and secured. The tube sheet serves as a barrier between the two fluids, allowing heat to be transferred from one to the other. The layout of the tube sheet depends on the design of the heat exchanger, which includes the number of tubes, the size of the tubes, and the spacing between the tubes. The layout is typically determined using computer-aided design (CAD) software, which can optimize the placement of the tubes to achieve the desired heat transfer performance. In general, the tubes are arranged in a triangular or square pattern on the tube sheet. The triangular pattern is often preferred because it provides better support for the tubes and reduces the risk of vibration and damage. The spacing between the tubes is also important, as it affects the flow rate and pressure...
Post a Comment
Read more

What is aluminum finned tubes?

What is aluminum finned tubes? Aluminum finned tubes are a type of finned tube air heat exchanger that uses aluminum fins attached to a tube made of a different material, such as copper or steel. The aluminum fins are typically extruded or formed to increase the surface area of the tube, which in turn increases the efficiency of heat transfer. Aluminum finned tubes are commonly used in HVAC systems, as well as in industrial and power plant applications. They are preferred over other types of finned tubes in some applications because they are lightweight, corrosion-resistant, and have good thermal conductivity. Additionally, aluminum is relatively inexpensive compared to other metals commonly used in heat exchangers, such as copper and stainless steel. The specific properties of aluminum finned tubes can vary depending on the alloy used to make the fins. For example, aluminum fins made from alloys such as 6061 and 3003 have good corrosion resistance and thermal conductivity, while those...
Post a Comment
Read more

What is the difference between pipe bends and elbows?

Bends and elbows are fittings used to change the direction of a pipe. These two kinds of pipe fittings have a wide range of applications in construction, but in actual use, the performance of pipe bends and elbows is different, and elbows are used much more than pipe bends. What is the difference between pipe bends and elbows? An elbow is a pipe part with a bend, which is a commonly used pipe part. Bends are usually manufactured to specific needs. Compared with the elbow, the elbow is much longer and is a curved pipe, while the elbow is only a part that changes the direction of the pipe. Although both are components that change the direction of the pipeline, there are many differences between these two components. 1. Different manufacturing processes for  pipe bends and elbows In the manufacturing process cold and hot bent pipes can be made of pipe bends, which directly bent by the pipe bending machine, and the  bent pipe  can be manufactured at one time without secondary...
Post a Comment
Read more