Skip to main content

Floating coil heat exchanger

Floating coil heat exchanger

Floating coil radiators can be widely used in boilers in heating, air conditioning and hot water supply systems in industrial and civil buildings such as chemical, oil refining, shipbuilding and other factories as well as hotels, restaurants, office buildings, school scientific research buildings, Yiyuan outpatient wards and other buildings. It is used as heat exchange equipment in rooms, heat exchange station buildings and air-conditioning machine rooms.

Floating coil heat exchanger application scope

1. The heat exchanger shell has two types: ordinary steel plate and stainless steel plate, and the heat transfer tube bundles are all copper tubes.

2. The tube side design pressure of the heat exchanger is 0.1-0.9MPa for steam type and ≤1.6MPa for water-water type; the shell is equipped with three specifications of 0.6MPa, 1.0MPa and 1.6MPa respectively. When selecting equipment, pay attention to the heat source and equipment. performance to match.

3. Due to the high heat transfer efficiency of this heat exchanger, a temperature regulator (i.e. thermostat) must be installed on the steam inlet pipe of the heat exchanger to control the steam flow and hot water outlet temperature.

4. The transportation and installation of the heat exchanger must use lifting equipment such as cranes to strictly prevent rolling. The heat exchanger should be firmly fixed to the foundation to prevent vibration during operation. Maintenance locations should be left around the heat exchanger.

Features of floating coil heat exchanger

(1) Using a new structure of floating coil bundles, the heat transfer capacity is improved, and the automatic descaling ability is greatly improved;

(2) The pipe bundles can be connected using union joints, which reduces welding points and makes maintenance more convenient;

(3) Compact structure, small size and small floor space.

Materials of floating coil heat exchanger

The shell material is carbon steel or stainless steel, and the heat exchange tube material is copper. Customized floating coil heat exchangers with special materials, heat exchange areas and working pressure levels.

Comments

Post a Comment

Popular posts from this blog

What is tube sheet layout?

What is tube sheet layout? A tube sheet is a component used in shell and tube heat exchangers and other types of heat transfer equipment. It is a flat plate with holes drilled in it, through which tubes are inserted and secured. The tube sheet serves as a barrier between the two fluids, allowing heat to be transferred from one to the other. The layout of the tube sheet depends on the design of the heat exchanger, which includes the number of tubes, the size of the tubes, and the spacing between the tubes. The layout is typically determined using computer-aided design (CAD) software, which can optimize the placement of the tubes to achieve the desired heat transfer performance. In general, the tubes are arranged in a triangular or square pattern on the tube sheet. The triangular pattern is often preferred because it provides better support for the tubes and reduces the risk of vibration and damage. The spacing between the tubes is also important, as it affects the flow rate and pressure...
Post a Comment
Read more

What is aluminum finned tubes?

What is aluminum finned tubes? Aluminum finned tubes are a type of finned tube air heat exchanger that uses aluminum fins attached to a tube made of a different material, such as copper or steel. The aluminum fins are typically extruded or formed to increase the surface area of the tube, which in turn increases the efficiency of heat transfer. Aluminum finned tubes are commonly used in HVAC systems, as well as in industrial and power plant applications. They are preferred over other types of finned tubes in some applications because they are lightweight, corrosion-resistant, and have good thermal conductivity. Additionally, aluminum is relatively inexpensive compared to other metals commonly used in heat exchangers, such as copper and stainless steel. The specific properties of aluminum finned tubes can vary depending on the alloy used to make the fins. For example, aluminum fins made from alloys such as 6061 and 3003 have good corrosion resistance and thermal conductivity, while those...
Post a Comment
Read more

What is the difference between pipe bends and elbows?

Bends and elbows are fittings used to change the direction of a pipe. These two kinds of pipe fittings have a wide range of applications in construction, but in actual use, the performance of pipe bends and elbows is different, and elbows are used much more than pipe bends. What is the difference between pipe bends and elbows? An elbow is a pipe part with a bend, which is a commonly used pipe part. Bends are usually manufactured to specific needs. Compared with the elbow, the elbow is much longer and is a curved pipe, while the elbow is only a part that changes the direction of the pipe. Although both are components that change the direction of the pipeline, there are many differences between these two components. 1. Different manufacturing processes for  pipe bends and elbows In the manufacturing process cold and hot bent pipes can be made of pipe bends, which directly bent by the pipe bending machine, and the  bent pipe  can be manufactured at one time without secondary...
Post a Comment
Read more